Jumil Exacta air 2980 PD Pantografica, Operator'S Manual, Page: 27 / 116

27
Operator’s Manual JM 2980 PD Pantográfica
7.2 - Turbofan Assembly
7 - PRODUCT ASSEMBLY
For the turbofan assembly, it
is enough to place it in the wanted
position, obeying the correct distance
of the pto shaft coupling or of the
hydraulic hoses, soon after, fasten the
same through the clamps.(Fig.022)
7.1 - Drawbar Placement in
work position
To place the drawbar in work
position it is enough to loosen the
locking pin (“a” Fig. 020), to place the
same in the position (“b” Fig.020),
after set up the third point according
to (Fig.021).
a
b
Fig. 020
Fig. 021
Fig. 022