Operation
54
8.9 Setting the timer
The timer can be used to program the duration of a temperature control
application from 0 to 999 minutes. The setpoint temperature is maintained for
the programmed time. After the set duration has elapsed, the device switches to
standby mode.
The device is switched on.
1. Press the
[MENU]
key.
2. Use the arrow keys to select the menu option
<tSEt>
and confirm with
[OK]
.
The minute display flashes.
3. Use the arrow keys to set the minutes.
Press and hold the arrow key for fast counting.
4. Confirm with
[OK]
.
The display flashes briefly.
The timer is programmed and active.
The decimal point flashes on the display until the setpoint temperature is
reached. The timer starts once the setpoint temperature has been reached. The
actual temperature and remaining operating time are now displayed in turns.
After the set time has elapsed, a double acoustic signal sounds and the device
switches to standby mode.
The setpoint temperature can still be changed until it is reached. The timer
remains active and starts when the new setpoint temperature is reached. If the
setpoint temperature is changed while the timer is running, the timer is
deactivated.
The running timer is stopped with the
[OK]
key.
Summary of Contents for CORIO CP-1000F
Page 72: ......
