– 17 –
1. DDL-9000B-S
(Specification for minute-quantity lubrication)
Face plate needle
bar lubrication : Minute-quantity lubrication by the oil wick
Hook
: Forced lubrication by the plunger pump
Quantity of oil can be adjusted by the hook oil
adjusting screw
.
Lubricant can be fed to the oil tank
through the
arm lubrication hole
.
2. DDL-9000B-M
(Specification for semi-dry items)
Face plate needle
bar lubrication : Lubrication by grease sealed in the needle bar lower
metal
Hook
: Forced lubrication by the plunger pump
Quantity of oil can be adjusted by the hook oil
adjusting screw
.
Lubricant can be fed to the oil tank
through the
arm lubrication hole
.
3. DDL-9000B-DS (Specification for dry items)
Face plate needle
bar lubrication : Lubrication by grease sealed in the needle bar lower
metal
Hook
: Dry hook (RP hook)
Adjustment Procedure
Results of Improper Adjustment
Summary of Contents for DDL-9000B-DS
