JUKI APW-896/IP-420 Instruction Manual Download Page 33

Page: 33 / 140

− 29 −

(2) Sewing screen (Independent sewing mode)

Symbol

Name of button

Description

INTERLINING SUPPLY button

When ths button s pressed, nterlnng s suppled.

＊

This is displayed when “With” of

, automatc nterlnng supplyng devce s set

wth the optonal settng.

TYPE OF WELT CHANGE-OVER button

Type of welt change-over screen is displayed and change-over of type of welt and adjustment
of parallelism of the binder can be performed.

CLAMP UP PROHIBITION AT SEWING END

button

When ths button s held pressed, the clamp s returned n the lowered state at sewng end.

It is convenient to use this button at the time of adjustment of marking light or trial sewing.

DIRECT PATTERN LIST button

Direct pattern list screen is displayed and selection of the sewing data can be performed.

COUNTER CHANGE-OVER button

When this button is pressed, the display of sewing counter and number of pcs. counter is

changed over.

＊

This button is displayed only when both sewing counter and number of pcs. counter are

ON.

COUNTER VALUE CHANGE button

Ths button changes the counter value whch s dsplayed at present.

BOBBIN THREAD (RIGHT) REMAINING
AMOUNT VALUE

This button detects reflecting light from bobbin and informs that bobbin thread remaining

amount s runnng out. When one sttchng completes, the counter value s subtracted, and

the count-up screen is displayed when “0” is reached.

＊

This button is displayed only when the reflecting light from bobbin is detected.

BOBBIN THREAD (LEFT) REMAINING
AMOUNT VALUE

This button detects reflecting light from bobbin and informs that bobbin thread remaining

amount s runnng out. When one sttchng completes, the counter value s subtracted and the

count-up screen is displayed when “0” is reached.

＊

This button is displayed only when the reflecting light from bobbin is detected.

MARKING LIGHT SETTING button

Marking light setting screen is displayed, and changeover of marking light irradiation position

and setting of change of marking light set value

and

are performed.

＊

It is possible to customize display/non-display of the respective buttons.

For the details, refer to

“

-13. CUSTOMIZING THE DATA INPUT SCREEN” p.80

Summary of Contents for APW-896/IP-420













































































































































Search results

Summary of Contents for APW-896/IP-420

Reviews:

JUKI APW-896/IP-420, Instruction Manual, Page: 33 / 140

Search results

Summary of Contents for APW-896/IP-420

Reviews: