– 46 –
Foldng tmng nput screen for
the blade shape
Name
Function overview
I
FOLDING BLADE A ON/OFF
TIMING SETTING button
The foldng blade A ON/OFF
tmng settng screen s dsplayed.
J
FOLDING BLADE A2 ON/OFF
TIMING SETTING button
The foldng blade A2 ON/OFF
tmng settng screen s dsplayed.
K
FOLDING BLADE A3 ON/OFF
TIMING SETTING button
The foldng blade A3 ON/OFF
tmng settng screen s dsplayed.
L
FOLDING BLADE A4 ON/OFF
TIMING SETTING button
(*1)
The foldng blade A4 ON/OFF
tmng settng screen s dsplayed.
M
FOLDING BLADE A5 ON/OFF
TIMING SETTING button
(*1)
The foldng blade A5 ON/OFF
tmng settng screen s dsplayed.
N
FOLDING BLADE B ON/OFF
TIMING SETTING button
(*1)
The foldng blade B ON/OFF
tmng settng screen s dsplayed.
O
CANCEL button
The screen s returned to the
prevous screen.
P
SEWING SHAPE INPUT
button
The sewng shape nput screen s
dsplayed to allow the change of
the sewng shape.
I
O
L
K
J
P
N
Example) In the case BLADE button
D
is pressed
3
Select the folding blade timing for which is to be set.
When ON/OFF TIMING SETTING button
I
,
J
,
K
,
L
,
M
or
N
s pressed, the ON/OFF tmng settng screen for the
blade whch corresponds to the locaton ndcated by the
button.
Example) In the case NO PATTERN
SELEctIoN button
H
is
pressed
I
J
K
L
N
M
O
P
Foldng tmng nput screen for the
case no pattern type s selected
4
Set the timing.
The settng tme s set by pressng numerc keypad
Q
. To
dsable the tmng settng, press DISUSE button
U
.
When you press ENTER butto
T
, the numerc value
you have set s stored n memory.
Foldng tmng nput screen
Name
Function overview
a
The tmng at whch the
foldng blade s turned ON
(actvated) s dsplayed
It represents the watng tme (n
seconds) from the start of foldng to
the actvaton of the cylnder.
B
The tmng at whch the
foldng blade s turned
OFF (returned to ts home
poston) s dsplayed
It represents the watng tme (n
seconds) from the end of foldng to
the return of the cylnder.
Q
Numerc keypad
Ths button can be used to nput data
wthn the range from 0.00 to 9.95.
(*2)
R
+ button
Ths button s used to ncrease the
set value n ncrements of 0.05 (sec).
S
－
button
Ths button s used to decrease the
set value n ncrements of 0.05 (sec).
T
ENTER button
This button is used to confirm the
nput value and close the screen.
O
T
R
Q
a
B
S
(*2) a set value can be input in increments of 0.01 sec by means of
the numeric keypad. When the set value is recorded by means
of the ENtEr key, the value is rounded down to 0.00 when the
first decimal plate is less than 0.05 or rounded down to 0.05
when it is in the range from 0.06 to 0.09.
U
(*1) this button may not be displayed for some sewing shapes.
