－
5
－
) Fully rase latch
2
of bobbn case
1
untl t stops,
and take the bobbn case out of the hook. The bob-
bn ftted n bobbn case
1
wll not come off the
bobbn case by holdng latch
2
with fingers.
2) To nstall the bobbn case n the hook, be sure to
rase latch
2
and fully fit the bobbin case over the
hook drvng shaft. Then release latch
2
to let t
down.
WarNING :
turn oFF the power before starting the work so as to prevent accidents caused by abrupt start of the
sewing machine
4-3. Installing / removing the bobbin case
1
2
A
B
C
D
4-4. Setting a bobbin into the bobbin case
Please use the accessory exclusive
bobbin case. also, if it is not pushed in
far enough, bobbin case
1
might fall
out during sewing. So, be careful.
) Hold the bobbn n a way that the thread open end
s drected to the rght as observed from you, and
set the bobbn nto the bobbn case.
2) Pass the thread through thread slt
A
, and pull the
thread n drecton
B
. By so dong, the thread wll
pass under the thread tenson sprng and come out
from notch
C
.
3) Check that the bobbn rotates n the drecton of the
arrow when bobbn thread
D
s pulled.