– 86 –
No.
Item
Setting range
Edit unit
4530/6030
6060
Counter motion selection
---
---
Sewing counter
No. of pcs. counter Bobbin counter
Height of eight of presser at the time
of 2 step stroke
10 to 300
1
Buzzer sound can be prohibited.
---
---
Without buzzer sound Panel operating sound Panel operating sound + error
Number of stitches
of thread clamp release is set.
1 to 7
1
Clamping timing
of thread clamp can be delayed.
－
10 to 0
1
Thread clamp control can be prohibited.
---
---
Normal
Prohibited
Feed motion timing is selected.
Set the timing in “–” direction when stitch is not
well-tightened.
－
8 to 16
1
State of the presser after end of sewing is selected.
---
---
Presser goes up
after moving at
start of sewing.
Presser goes up immediately after end of sewing.
Presser goes up
by pedal operation
after moving at
start of sewing.
The presser foot moves to the sewing starting point,
then goes up with the presser foot lifting switch.
The sewing machine starts sewing with the
start switch. When the sewing machine stops
midway through sewing, the presser foot goes
up at the preset presser lift position.
Presser lifting motion at the end of sewing can be set.
---
---
With presser up
Without presser up
Origin retrieval can be performed every time after end of
sewing (other than combination sewing)
---
---
Without origin retrieval
With origin retrieval
Origin retrieval in combination sewing can be set.
---
---
Without origin
retrieval
Every time 1
pattern is finished.
Every time 1 cycle is
finished.
