JUKI AMS-224EN-4530 Page 22 Instruction Manuals Download | Manualshive

Page: 22 / 120

background image

– 18 –

①

Precautions to be taken when handling USB devices

• Do not leave the USB device or USB cable connected to the USB port while the sewing machine is in opera-

tion. The machine vibration can damage the port section resulting in loss of data stored on the USB device or
breakage of the USB device or sewing machine.

• Do not insert/remove a USB device during reading/writing a program or sewing data.

It may cause data breakage or malfunction.

•   When the storage space of a USB device is partitioned, only one partition is accessible.
•   Some type of the USB device may not be properly recognized by this sewing machine.
•  JUKI does not compensate for loss of data stored on the USB device caused by using it with this sewing ma-

chine.

• When the panel displays the communication screen or pattern data list, the USB drive is not recognized even

if you insert a medium into the slot.

• For USB devices and media such as CF cards, only one device/medium should be basically connected/insert

-

ed to/into the sewing machine. When two or more devices/media are connected/inserted, the machine will

only recognize one of them. Refer to the USB specifications.

• Insert the USB connector into the USB terminal on the IP panel until it will go no further.

• Do not turn the power OFF while the data on the USB flash drive is being accessed.

②

USB specifications

• Conform to USB 1.1 standard

• Applicable devices *

1 ��

Storage devices such as USB memory, USB hub, FDD and card reader

• Not-applicable devices ��

CD drive, DVD drive, MO drive, tape drive, etc.

• Format supported ��

FD (floppy disk) FAT 12

Others (USB memory, etc.), FAT 12, FAT 16, FAT 32

• Applicable medium size �

FD (floppy disk) 1.44MB, 720kB

Others (USB memory, etc.), 4.1MB ~ (2TB)

• Recognition of drives ��

For external devices such as a USB device, the device which is recognized first

is accessed. However, when a medium is connected to the built-in media slot, the
access to that medium will be given the highest priority. (Example: If a medium is in-
serted into the media slot even when the USB memory has already been connected
to the USB port, the medium will be accessed.)

• Restriction on connection � Max. 10 devices (When the number of storage devices connected to the sewing

machine has exceeded the maximum number, the 11th storage device and beyond
will not be recognized unless they are once disconnected and re-connected. )

• Consumption current

��The rated consumption current of the applicable USB devices is 500 mA at the maxi-

mum.

*

1

: JUKI does not guarantee operation of all applicable devices. Some device may not operate due to a compati-

bility problem.

«
...
20
21
22
23
24
...
»

Summary of Contents for AMS-224EN-4530

























































































































Reviews:

No comments

Related manuals for AMS-224EN-4530

Brand: Panasonic Pages: 8

Brand: Fellowes Pages: 7

Brand: Fellowes Pages: 8

Brand: Fellowes Pages: 8

APW-895N/IP-420

Brand: SanDisk Pages: 125

Brand: Singer Pages: 74

Brand: Necta Pages: 23

Brand: Kärcher Pages: 44

Brand: Janome Pages: 22

FOGSPRAY 3000 RGB

Brand: Mac Mah Pages: 31

Brand: Kärcher Pages: 261

Brand: Singer Pages: 50

Brand: JUKI Pages: 36

Brand: JUKI Pages: 50

Brand: JUKI Pages: 72

Brand: JUKI Pages: 2

Perfect Binder-C1

Brand: Canon Pages: 54

Perfect Binder-F1

Brand: Canon Pages: 74

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands