– 60 –
2-23. Using the simple operation mode
①
Select the sewing mode.
When the
key is pressed, SCREEN MODE SELECT
button
A
is displayed on the screen. When this button
is pressed, the screen mode is changed over between the nor-
mal operation and the simple operation.
When the normal operation is selected:
When the simple operation is selected:
A
With IP-420, the SIMPLE OPERATION mode is available.
(5) Setting of the skip of steps
①
Entering the skip setting mode
Press mode changeover button
A
to select skip setting
mode
B
.
A
D
E
B
C
②
Pressing the button of the step to be skipped.
Press button
C
of the step to display . The step is set to
"Skip". Another press on the button resets the skip setting. It is
possible to set two or more steps to "Skip".
When all skip button
E
or all skip reset button
D
is pressed, the skip can be set for all steps or the skip setting
can be reset for all steps. Note that the sewing screen is not
displayed even by pressing the set ready key when all steps
are set to "Skip".
It is possible to set the skipping of sewing of a given step.
If you want to skip the sewing of a certain step within the combination data, use this function.
