5
Walk assist mode
Press and hold the
DOWN
button
for 2 seconds and your e-bike motor will start to run at a
uniform speed of 6 Km/h and will continue to do so whilst you press that button. The display will
show “
P
” on the screen whilst in this “
Walk Assist
” mode. When you release the
DOWN
button
walk assist mode ends and the display reverts to as it was.
Walk Assist Mode
You should not be astride the bike when using walk assist.
Front Light
Press
UP
for 2 seconds to turn on the front light of your bike and also the backlight of the
display. Hold
UP
again
for 2 seconds and the light is turned off.
Turn On/Off Backlight
Power Assistance (PAS) Level Selection
Use the
UP or DOWN
buttons to change the assistance provided by your motor.
The default power ranges from level 1 to level 5. If you want to
switch off assistance
then use
DOWN
to reach
level 0
PAS Level 3
