10
Power Assistance Level Settings
1.
Power Assistance:
Number of Levels
You can select
how many levels
of assistance are provided by the display.
You can choose to have
3
,
5
,
7
or
9
levels
Each range of levels may also include zero:
0-3
/
1-3
, or
0-5
/
1-5,
or
0-7
/
1-7,
or
0-9
/
1-9
.
The default mode is 0-5 i.e. 5 increasing levels of assistance ( and 0 for zero assistance).
Press
UP or DOWN
to select your preference, then press
MODE
to confirm and enter the PAS
ratio settings page. 5 levels normally works well, but choosing a higher number can give a better
match for your own preferred rate of exercise while riding.
PAS Mode Select Interface
2.
PAS
Ratio
settings
Each level of PAS can be set as a percentage value.
We recommend using
5 levels of assistance
with the values
50, 61, 73, 85 and 96
.
Use
UP
and
DOWN
to enter a value then Press
MODE
to confirm each value in turn.
After all the PAS ratios have been entered,
hold
MODE
to confirm all values and return to the
previous menu. (Other settings can be found in the attached list no. 3)
PAS Ratio Interface
Over-Current Protection Settings
CUR indicates the setting for protecting your bike from damage caused by over stressing
its electrical components. The CUR value
can be
changed from 7.0A to 22.0A. But if you exceed
15A you are likely to damage your bike and you will also invalidate its warranty.
This value should remain set at no higher than15A
.
CUR Settings Interface
