13
System Settings
Delay time settings of battery power
DLY shows how often the battery voltage is monitored in real-time.
Press
UP
or
DOWN
to select a frequency period of
3, 6 or 12s
, then press
MODE
to confirm. The
default frequency is every 3s. It is sometimes useful to set a longer delay to overcome the effect
of “voltage sag” when your bike motor is under increased load (setting off for instance) and when
the voltage will drop briefly as a consequence. Normally though, 3 or 6 secs is a reasonable
setting to use.
Delay time of battery power interface
1.
Max speed limited
MAX SPD refers to the max speed limit settings. Press
UP
or
DOWN
to set the max speed from
25Km/h - 40 Km/h. Press
MODE
to confirm, ready to then enter the following section “Walk
Assist” setting. The default is 40Km/h, which enables the actual limit to be enforced by the
controller within the bike.
Interface of max speed limited settings
This setting (LS = 40)is the preferred setting allowing the maximum speed to be set by the pre-
configured controller. Over-riding this setting may make your bike unresponsive while riding.
