14
2.
Walk Assist Button
PUS refers to whether the
UP button
can be used to help when walking with the bike.
Press
UP
or
DOWN
to choose
Y
or
N
.
Y
means walk assist is enabled when the UP button is held whilst walking alongside the bike.
The default value is Y.
Press
MODE
to confirm and enter both the above PAS speed settings.
Interface of PAS push
Walk Assist Speed Setting
Adjust the walk assist speed by pressing
UP or DOWN
to adjust from 20% to 35%
,
and then press
MODE
to confirm. The default value is 25%.
Walk speed ratio setting
Slow Start-up Setting
SSP sets how quickly the motor accelerates when the pedals are turned. The range is 1-4, where
4 is the slowest acceleration. Press
UP
or
DOWN
to choose, and then press
MODE
to confirm.
The default value is 1. Sometimes this may be too quick for some riders.
Motor acceleration
