©JRI
15
a)
None
When this mode is selected the channel will record without interruption. The memory will
behave as if it were in rollover mode i.e. once the memory is full the oldest data will
gradually be overwritten by new data.
b)
Programmed Stop Delay
All the channels of the SPY IP will stop recording simultaneously at a set date/time. This
picto will appear in the bottom right-hand corner of the screen.
When you press this zone the programmed stop date/time will appear.
c)
Push-button
When the SPY IP is recording this picto will appear in the bottom right-hand corner of
the screen (zone 5). When you press the button an authentication dialog box will appear
prompting the operator to enter his code. After authentication by Sirius the relevant
channel will stop recording. If the operator hasn’t got the rights the request will be
rejected and the channel will continue recording.
d)
Target value
This « off mode » can only be used and configured channel by channel. The channel will
stop recording when it has reached its target value taking into account the direction of
the variation
(upward or downward movement).
Depending on the configuration either this button or this one will appear in
bottom right hand corner of the screen.
When you press the button, the target value which has been
programmed to stop the recording will display.
If a channel has not been configured with a target value, it is configured like in « rollover
memory » mode and nothing will be displayed in zone 5
(BP).
e)
Immediate
This command is only accessible in Sirius and stops the recording of all the channels. The
SPY IP switches all channels to “push-button” off mode.
f)
Memory full
The measuring channels configured with this mode will stop recording when their
memory is full. The following message will appear: "MEMORY FULL".
Summary of Contents for SPY IP 4
Page 1: ...USER MANUAL SPY IP 10486F...
