5-69
5.9.1.3. Measure the cable loss
Check that the cable between the AP-IFU and the AP-RFU is connected correctly, and start cable
loss measurement.
When the measurement of cable loss between the AP-IFU and the AP-RFU is completed, the
value is automatically compensated for.
The cable loss compensation value is stored in the memory in the AP-RFU.
Step 1: Select the Control (AP) screen in the AP Local Management Tool.
Step 2: In the Cable Loss Measurement field, click the Execute button.
Figure 5-25 Measure the cable loss
Step 3: The Confirmation dialog box appears. Clicking the Yes (Y) button executes the
measurement.
Figure 5-26 Confirmation Dialog Box
Step 4: If measurement ends normally, the Result dialog box appears. Click the OK
button to end the measurement process.
You can compensate for a cable loss of 0 to 15 dB
Figure 5-27 Cable Loss Measurement Complete
Summary of Contents for NT337-XL2
