JRC JSS-2150 -, Instruction Manual

Page: 96 / 248

Operation
4-30
4.3.3 Setting the automatic gain control (AGC)
■
Procedure
■
1
11
.
..
Press the
MENU
key, and through
hierarchical menus, select 5.4 Receiver.
2
22
.
..
Select 1. Auto gain control and press ENT,
when the cursor moves to the right use the jog
dial to select Slow, Fast, or OFF.
After selecting and pressing ENT, the
settings are complete.
The same settings can be done by pressing and holding the FUNC key and the
5
AGC
key at the same time.
4.3.4 Setting the noise reduction (NR)
■
Procedure
■
1
11
.
..
Press the
MENU
key, and through
hierarchical menus, after 5.4 Receiver
appears, move the cursor to 2. Noise
reduction.
2
22
.
..
Press ENT to move the cursor to the right,
then use the jog dial to select NR1, NR2,
BC, or OFF.
After selecting and pressing ENT, the
settings are complete.
- The various settings are shown below.
・ NR1 ： Noise reduction (low)
・ NR2 ： Noise reduction (high)
・ BC ： Beat canceller
- The same settings can be done by
pressing and holding the FUNC key
and the 3
NR
key at the same time.
- This function is invalid in DSC mode or
telex mode. Moreover, the beat
canceller becomes invalid in CW mode.
5.4)Receiver
1.Auto gain control :Slow
2.Noise reduction :OFF
3.Attenuation :OFF
4.Clarifier :+000Hz
5.Squelch :OFF
6.CW bandwidth :Narrow
7.Scan
0.Back
5.4)Receiver
1.Auto gain control : Fast
2.Noise reduction :OFF
3.Attenuation :OFF
4.Clarifier :+000Hz
5.Squelch :OFF
6.CW bandwidth :Narrow
7.Scan
0.Back
5.4)Receiver
1.Auto gain control :Slow
2.Noise reduction :OFF
3.Attenuation :OFF
4.Clarifier :+000Hz
5.Squelch :OFF
6.CW bandwidth :Narrow
7.Scan
0.Back
5.4)Receiver
1.Auto gain control :Slow
2.Noise reduction :
NR1
3.Attenuation :OFF
4.Clarifier :+000Hz
5.Squelch :OFF
6.CW bandwidth :Narrow
7.Scan
0.Back
Note
Note