JRC JSS-2150 -, Instruction Manual

Page: 62 / 248

Names and Functions
2-10
2.4 Display of data terminal
The content displayed on the LCD screen in the data terminal is different according to the
situation. This section describes a regular screen, the telex communication screen, and the
message file edit screen.
2.4.1 Regular screen
1. Indicates the Tx and Rx frequencies.
2. Indicates the communication mode.
3. Indicates the main menu.
When pressing the Enter key, indicates
the drop-down menu of the main menu
pointed by the cursor.
※
Telex mode only.
4. Indicates the conditions of the telex
communication.
※
Telex mode only.
5. Indicates the scanning information in telex
mode. When restarting scanning after
sending a DSC Auto-ACK or powering
off/on, indicates “Running now” instead of
the detail information.
※
Telex mode only.
6. Indicates the operation result such as the
self-diagnosis.
7. Indicates the guide according to the
cursor position. Moreover, the locating
faults are displayed if any errors occur.
 Information: MEM ： Internal memory
 Information: KBD ： Keyboard control
 Information: PRN ： Printer
 Information: USB ： USB Memory
8. Indicates that the connected USB memory
is available. Additionally, “ACS” is shown
if some time is needed to mount the USB
memory.
9. Indicates the antenna tuning condition.
 READY ： Tuned
 NOT READY ： Not tuned
10. Indicates the power reduction setting.
2
1 8
3
4
5
6
9
7
10