JRC JLR-21, Instruction Manual

Page: 107 / 164

5-43
5.4.4 Demo
Selecting
DEMO from the "5.4 Maintenance Menu" displays the settings screen.
1. Press the key, and use the keys to enter a value.
2. Pressing the key displays
START . Press the key again.
3. A message is displayed. Select
YES , and press the key.
Note that if an external device is
connected, demo data is sent to
the external device.
• Press to return to the Main Menu.
• A demonstration is performed by the sensor, and the data received from the sensor is
displayed, so the demo cannot be run unless the sensor is connected.
• During the demo, S blinks at the bottom of whichever screen is displayed.
• To stop the demo:
a) Turning the unit off restores the unit to normal operation when the power is
turned back on.
b) Select STOP on the demo settings screen.
Demo Settings Menu
Memo
Procedure
Demo Type
1: Right turn
2: Left turn
3: Manual
4: Meandering
5 and over are
disabled