JRC JFE-700 Instruction Manual Download Page 60

Page: 60 / 100

4. Operation

4-26

Self-test of Alert

Refer to 4.12 Alert Control for more details on each alert.

◎

Self-testing by simulating each alert.

Note

：

Lost Proc. alert is supported only JFE-400(detect of disconnection of between processing unit and display unit)

Alert of self-testing will continue to appear unless turn the self-test alert setting to off.



ALL

・

Touch

to display the alert for self-test.

・

Select the required item to display the settings.

・

When

is touched, return to previous menu

・

When

is touched in each sub menu, selected content.

・

When

is touched in each menu, return to submenu without

registering setting.

・

Touch

and the setting will be displayed.

・

Detail item

：

OFF

/ON

・

Change the settings with

，

・

Touch

to start simulating alert when setting is ON.

[About generating alerts]

This function simulates only alerts that are set to be generated by

equipment settings. See 4.12 Alert Control for details on the alerts.

Summary of Contents for JFE-700





































































































Search results

Summary of Contents for JFE-700

Reviews:

Related manuals for JFE-700

Brands by name

Popular brands

JRC JFE-700, Instruction Manual

Search results

Summary of Contents for JFE-700

Reviews:

Related manuals for JFE-700

Brands by name

Popular brands