JRC JFE-700, Instruction Manual

Page: 8 / 100

First Aid Method
vi
11 . Electric shock (defibrillation)
a) If the AED determines that electric shock is needed, the voice
prompt saying, "Shock is needed" is issued and charging starts
automatically.
b) When charging is completed, the voice prompt saying, "Press the
shock button" is issued and the shock button flashes.
c) The first-aider must get away from the injured or ill person, make
sure that no one is touching, and then press the shock button.
d) When electric shock is delivered, the body of the injured or ill person may jerk.
12 . Resurgence of cardiopulmonary resuscitation (CPR)
a) Resume chest compressions by following the voice prompts of the AED.
• With each compression, depress the chest wall to a depth of
approximately 5 cm.
• Perform compressions at the rate of 100 - 120 times per minute.
13 . Automatic electrocardiogram analysis
a) When 2 minutes have elapsed since you resumed cardiopulmonary resuscitation (CPR), the
AED automatically analyzes the electrocardiogram.
b) If you suspended CPR by following voice prompts and AED voice prompt informs you that
shock is needed, give electric shock again by following the voice prompts.
If AED voice prompt informs you that no shock is needed, immediately resume CPR.
14 . When to stop CPR (Keep the electrode pads on.)
a) When the injured or ill person has been handed over to the emergency services
b) When the injured or ill person has started moaning or breathing normally, lay on the side in a
recovery position and wait for the arrival of emergency services.
Press the shock button.