manualshive.com logo in svg

JRC ECDIS, Instruction Manual

Share
Download
JRC ECDIS Instruction Manual Download Page 122

 

Section 20    Failures and After-Sale

 

Services

 

20-10

 

 

Symptom

 

Cause

 

Action

 

Rudder angles are not 
displayed. 
Alternatively, the values 
are not displayed 
correctly. 

The communication is not set 
correctly.

 

Set the communication correctly.

 

The power supply for the rudder 
angle indicator is not turned on.

 

Turn on the power supply for the 
rudder angle indicator.

 

The connection with the rudder angle 
indicator is abnormal.

 

Check the connection with the rudder 
angle indicator. 
When a rudder angle indicator is 
connected to the serial LAN interface 
circuit, check if the LED of the 
corresponding port is lit at data 
reception.

 

The power supply for the serial-LAN 
interface circuit (CMH-2370) is not 
turned on. 
(Case where the rudder angle 
indicator is connected to the 
serial-LAN interface circuit or the 
rudder angle indicator is connected 
to the analog option circuit)

 

Turn on the power supply for the 
serial-LAN interface circuit.

 

The serial-LAN interface circuit 
(CMH-2370) is faulty. 
(Case where the rudder angle 
indicator is connected to the 
serial-LAN interface circuit or the 
rudder angle indicator is connected 
to the analog option circuit)

 

Make a request to the distributor for 
repair.

 

The analog option circuit (CMJ-560) 
is not set correctly. 
(Case where the rudder angle 
indicator is connected to the analog 
option circuit)

 

Set the analog option circuit correctly 
according to the rudder angle 
indicator.

 

The analog option circuit (CMJ-560) 
is faulty. 
(Case where the rudder angle 
indicator is connected to the analog 
option circuit)

 

Make a request to the distributor for 
repair.

 

The internal wiring is faulty.

 

Make a request to the distributor for 
repair.

 

The central control unit (NDC-1590) 
is faulty.

 

Make a request to the distributor for 
repair.

 

 
 

 

Summary of Contents for ECDIS



















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands