manualshive.com logo in svg

JRC ECDIS, Instruction Manual

Share
Download
JRC ECDIS Instruction Manual Download Page 109

 

 

19-57 

Section 19    Maintenance & Inspection 

 

 
 

1 

2 

3 

4 

5 

6 

7 

8 

9 

10 

11 

12 

13 

14 

15 

16 

17 

18 

19 

19 

21 

23 

24 

24 

26 

27 

 

 

 

19.11  Recovery of the Images in the C 

Drive 

 

 

 

The backup power supply (DC power supply, etc.) of the equipment must be 

connected when recovery of the C drive image is performed. If the power supply 

stops during recovery, an accident may occur. 

 

Do not turn off the power supply during recovery of the C drive image. 

Otherwise, equipment malfunction occurs, possibly causing an accident. 

 

The operating system (OS) of this equipment runs on the C drive. 

The contents of the C drive including the images are stored in the D drive. 

When the OS operation on the C drive becomes unstable, the images in the C drive can be written 

back from the D drive. 

 

Note 

When the images in the C drive are written back, the information relating to C-MAP is cleared. 

After writing back of images, re-register the database and Licence of C-MAP and perform update 

as required. 

 

The flow of writing back of images in the C drive is as follows. 

 

Start this equipment with the OS in the D drive 

"19.11.1 Starting the equipment with the OS in the D drive" 

 

Execute the SSD recovery tool. 

"19.11.2 Executing the SSD recovery tool" 

 

Start the equipment with OS in the C drive. 

"19.11.3 Starting the equipment with the OS in the C drive 

(Software automatic recovery)" 

 

Re-set C-MAP. 

"19.11.4 Re-setting C-MAP" 

 

Terminate recovery. 

 

 

 

Summary of Contents for ECDIS



















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands