3-4
CCPM SERVO CENTERING WITH THE SUB-TRIM FUNCTION
27
JR PCM10, 10S, 10SX, 10SXII, 10X SYSTEMS
1) Enter the Sub-Trim function (Code 15).
2) Adjust the left (aileron), right (AUX 1) and front (elevator) servos as needed until the servo arm is exactly parallel to the servo as shown when
the collective stick is in the center position. It will be necessary to press the
Page
button to access the right servo (AUX 1) sub-trim value.
3) Press
Enter
to exit the Sub-Trim function.
XP8103, XP8103 WITH DIGTIAL TRIMS
1) With the radio power switch on, press the
Up
and
Down
keys simultaneously to enter the Function mode.
2) Press the
Up
key until “Sub Trim” appears on the screen.
3) Adjust the left (aileron), right (AUX 1), and front (elevator) servos as needed until the servo arm is exactly parallel to the servo as shown when
the collective stick is in the center position. It will be necessary to press the
Sel
key once to access the right servo (AUX 1) sub-trim.
4) Press the
Up
and
Down
keys simultaneously to exit the Function mode.
[SUB TRIM]
THRO
AILE
ELEV
RUDD
GEAR
0
0
0
0
0
ENTER
PAGE
+
–
CL
+
–
CL
+
–
CL
+
–
CL
+
–
CL
Press
Page
to access
the second screen.
Increase or decrease
value to center the
left servo.
Increase or decrease
value to center the
front servo.
[SUB TRIM]
PIT.
AUX2
AUX3
AUX4
AUX5
0
0
0
0
0
ENTER
PAGE
+
–
CL
+
–
CL
+
–
CL
+
–
CL
+
–
CL
Increase or decrease value
to center the right servo.
[Sub Trim]
£THRO
∞AILE
0
0
ELEV
RUDD
0
0
[Sub Trim]
£GEAR
∞ PIT.
0
0
AUX2
AUX3
0
0
Increase or decrease
value to center the
front servo.
Increase or decrease
value to center the
right servo.
Increase or decrease
value to center the
left servo.
SEL
Continued
