34
4-1
BODY ASSEMBLY/CANOPY ATTACHMENT
After trimming, attach the windshild to the body
temporarily with tape. Next, drill five 1/16" holes
through both the windshield and the body and
secure using the 2.3x8 mm screws provided.
Slide the completed body over the mechanics and secure
through the four canopy mount standoffs as shown.
Note:
Check to insure that the body
does not come contact with any
portion of the main frame, muffler,
servo/servo horns, etc. Trim for
clearance if necessary.
Rubber Grommet (4)
Preinstalled
Rubber Grommet (4)
Body
Canopy
2.3x8 mm Self Tapping Screw (6)
2.3x8 mm Self-Tapping Screw (6)
Trim the shaded area from
the windshield as shown.
