[DiaDENS-PC]
www.jpastar.com
— an item of the
В
type with the operational part of the F type.
Attention!
The device contains fragile elements. Protect it from blows.
*
the operational sequence (types
of chargers, charging procedures) has been described in detail in Instruction for the storage batteries
3. COMPLETE ASSEMBLY
3.1. The version of complete assembly of the DiaDENS-PC device corresponds to the Table 1.
Table 1
Name
Number
Electrostimulator "DiaDENS-PC"
1
Operation Instructions, Passport and Operation
Instructions proper
1
Electrode remote, therapeutic
1
Electrode, diagnostic
1
Connecting computer cable
1
CD, software
1
User instructions for DiaDENS-PC software package
1
Case
1
Cover for electrostimulator
1
Packaging
1
Power supply: battery of the 6F22 type
1
4. SAFETY RULES
Read carefully all information contained in this Operation Instructions in respect to your safety, as
well as recommendations for correct use and maintenance of the device
.
4.1. The device presents no danger for patients because of using low-voltage inner power supply. When
connected to personal computer, the device presents no danger either when used with connection a cable
specifically designed for safety operation.
4.2. The device can not be used for treatment or diagnosis of patients who have implanted electronic devices
(for instance, cardiostimulator) or for treatment of patients with individual in tolerance of electric current.
4.3. During stimulation, the patient must not be connected to any high-frequency electrical device other than
personal computer connected with a special cable provided in complete as sembly.
4.4. During stimulation or diagnosis with the computer connected to the device, one must not simultaneously
touch the patient and the computer frame.
4.5. Warning of potentially dangerous factors:
- simultaneous use of the device and other electric equipment by the patient (apart from personal computer
connected with special cable) may cause burns and potentially damage the device;
- operation of the device near (within about 1-metre distance) of a short-wave or microwave therapeutic
equipment, may induce instability of the device output data.
5. DEVICE SYSTEM AND FUNCTION
5.1.
The device consists of the frame 1 (Fig. 1) with inbuilt electrodes 13 (Fig. 2); cover 14 (Fig. 2) for
changing power supply.
The complete assembly of DiaDENS-PC device includes:
- remote pointed therapeutic electrode (Fig. 1.1).
- diagnostic electrode (Fig. 1.2).
In addition, to the device, other remote therapeutic electrodes of the model series from the enterprise-
manufacturer can be attached.
Attention! The remote therapeutic electrode may only be used in THERAPY regime.
Before using the remote electrode, the skin in the treatment area should be dampened with water or treated
with Malavti-lin ointment by apply small amount of it until completely absorbed.
5.2. The device is equipped with a liquid-crystal indicator "2" (Fig. 1).
5.3. The device has control keys as follows (Fig. 1):
-key "3" ("
B
" or «
Б
») - for switching on the BIOREPER regime and MiniAC regime (simultaneously with
