Joyner TROOPER T2, Owner'S Manual

Page: 31 / 205

31
Pedal
Clutch pedal
The left foot pedal controls the clutch cable .
With the pedal down, you can shift the shift lever
Brake pedal
The brake is located in the middle of the three
control pedals .Applying pressure to the pedal
applies pressure to the brake caliper around
the brake disc at the front and rear wheels and
slows or stops the vehicle.
Throttle pedal
Press the accelerator pedal down to increase
engine rpm.
z Before start the engine, you should check the three pedal to be they are operating
smoothly.
z Before start the engine, you must make sure that the spring pressure can returns the three
pedals to the rest position fully when released.
z If anyone of them can’t work well, please correct the problem before operating the
engine .If you can’t find or solve the problem yourself, please get the help from your
JOYNER dealer.
z
Improper operation of the clutch will lead to excessive wear of the clutch friction surface.
z When operating the vehicle, if it does not feel comfortable about clutch or throttle pedal ,
adjust the position of the pedal location sheet 1 and the pedal location sheet 2, tighten the
nut until it feels very comfortable.
Parking brake lever
Pull the parking lever up so that the unit can engage park brake. To release the unit, press
button in the front end of parking lever, then push the parking lever to the bottom.
Clutch
Pedal
Brake
Pedal
Park brake not engaged Park brake engaged
throttle
Pedal