Joyner TROOPER T2, Owner'S Manual, Page: 26 / 205

26
■
Nuts & Bolts
Check the wheels to see that the axle nuts are tightened, Use a wrench to make sure all
accessible nuts, bolts, and fasteners are tight.
■
Underbody & Exhaust System
Check for, and remove any dirt, vegetation or other debris that could be fire hazard or
interfere with the proper operation of TROOPER.
■
Air Cleaner
Check the air filter. Replace it if needed.
■
Leaks, Loose Parts
Walk around your TROOPER and look for anything that appears unusual, such as a leak or
loose cable.
■
Lights
Make sure the headlight, brake light and tail light are working properly.
■
Throttle
Check the free play and adjust if needed. Press the throttle to make sure it moves smoothly
without sticking, and snaps back automatically when it is released.
■
Clutch cable
Check the free play of clutch cable and adjust if needed. Press the clutch cable to make sure
it moves smoothly without sticking, and snaps back automatically when it is released.
■
Brakes
Press the brake pedal several times, check for proper brake pedal free play. Make sure there
is no brake fluid leakage.
■
Engine Stop
When engine is running, turn the switch key counterclockwise. Make sure engine stops.
■
Steering Wheel
Check that the wheels turn properly as you turn the steering wheel.
■
Cable
Check the cable housing for wear. Check the fittings are tight. Replace or tighten as needed.
■
Tie rod
Check the tie rod housing for wear. Check the fittings are tight. Replace or tighten as
needed.