Joyner TROOPER T2, Owner'S Manual

Page: 47 / 205

47
6. The spark plugs is hot after a long-time driving, make sure the spark plugs is not hot before
operation.
Wedge belt figure
Correct installation and the proper tension will ensure electrical generator and air conditioner
work well. If chap, tear, wear
，
or looseness happen, contact Joyner dealer and replace it
immediately.
Check the belt tension:
Apply a pressure (about 100N) on the belt, if the movement is more than 10mm, it is necessary
to replace the belt.
When checking the wedge belt, never start engine, or body injury even death may occur.
Shift cable adjustment
After a long time use, more and more free play of shift cable make gear position is not
accurately or shift lever in a wrong position, so adjust the shift cable refer to Preventative
maintenance and service log.
1. Loosen the adjustment nuts, move the cable forwards or backwards according
situation, repeat it until find a position where gear shift work correctly and the shift
lever work in a proper position.
2. Repeat step 1 with another shift cable.
3. Tighten all of the adjustment nuts.
10mm