2
induction heating
Induction heater JH1500
Information
This instruction book provides advice
and directions for installation, handling,
maintenance and troubleshooting.
IMPORTANT! Read this instruction book
carefully so you can learn the correct way of
using the induction heater. Do not neglect to
do this, since incorrect handling can lead to
personal injury and damage to the equipment.
The illustrations in the instruction book are
only to help with comprehension and do not
necessarily represent the equipment's exact
appearance. The equipment is intended to
be used in accordance with current practice
and the applicable safety regulations. The
equipment, as shown in the instruction
book, may be changed in the future without
warning.
The content of this instruction book can also
be changed without warning.
This instruction book contains information
that is protected by the Copyright Act. No
part of this publication may be reproduced
or published without the written consent of
JOSAM AB.
Conformance with directives and
standards
The JH1500 series is designed and
manufactured by JOSAM AB, an
EN‑ISO 9001/14001 certified development
and manufacturing company. The JH1500
series conforms with the requirements in the
CE standard.
PREFACE
JH1500 is a mobile induction heater, which
is used for heating metal parts on vehicles
without damaging nearby parts. All other use
of the equipment or use that does not comply
with the instructions in this instruction book,
can cause personal injury and/or damage to
the machine.
If the equipment is used incorrectly, JOSAM
AB cannot be held liable for damage to
the equipment, irrespective of whether the
damage has been caused intentionally or
unintentionally. Nor will JOSAM AB accept
liability for any subsequent financial losses or
loss of income.
Warranty
JOSAM AB provides a one year warranty
from the machine's delivery date and a
three months warranty on consumable parts
(inductor). The warranty covers material faults
and presupposes normal care and normal
maintenance.
The warranty presupposes that:
•
the equipment is installed correctly
and inspected in accordance with the
applicable regulations,
•
the equipment has not been modified or
rebuilt without the consent of JOSAM AB,
•
only original spare parts from JOSAM AB
have been used in the event of any repairs,
•
handling and maintenance has been
performed according to the directions in
this instruction book.
In the event of any complaint, verification is
required that the fault has occurred during the
warranty period and that the equipment has
been used within the capacity limits stated
in the technical data. In the event of any
complaint, the product type and article number
must be stated. These details can be found on
the identification plate, see chapter "Marking".
