background image

7

induction heating

Induction heater JH1500

General information

The JH1500 is designed and tested to conform 
to the strictest safety requirements. Read the 
following instructions carefully before you start 
using the JH1500 and pay attention to the 
applicable operating instructions, in order to 
operate the induction heater safely.

The information provided in this manual 
describes the work routines that we consider 
work best, but may under no circumstances 
be used as an excuse to ignore one's 
own personal responsibility or applicable 
regulations.

Great care has been taken during the design 
and manufacture of the JH1500 to ensure 
the system conforms with the applicable 
safety regulations for this type of equipment. 
During use and other work, everyone has a 
personal responsibility for their own and other 
individuals' safety.

Safe use of the induction heater is 
guaranteed by using the equipment correctly, 
in accordance with the descriptions and 
instructions in this manual. By reading and 
following the safety regulations, the JH1500 
user can ensure a safe work environment for 
himself/herself and his/her colleagues.

SAFETY

Summary of Contents for JH1500

































Reviews: