21
induction heating
Induction heater JH1500
Hose packet
The hose packet consists of:
1. connection block
2. handheld transformer with hose kit
3. operating button
4. inductor
Connection block
The connection block is mounted below the
electrical section, its upper section protrudes
into the electrical section. The cooling water's
pressure and return flow runs through the
connection block. The power cabling runs
from the electrical section, via two unions in
the connection block, and further, through the
hose up to the handheld transformer.
Handheld transformer with hose kit
During use, the handheld transformer functions
as a tool handle, the control button is mounted
permanently to the handheld transformer.
The inductor is attached to the handheld
transformer by four screws.
The hose kit comprises two hoses for the
cooling water's pressure and return flow. In
the hose for the pressure flow, there is also a
cable. Two earth cables and a control cable run
on the outside of the hoses.
Trigger button
Current switch to activate the heating. It sits in
a holder on the handheld transformer.
3
4
DESCRIPTION
1
2
2
