manualshive.com logo in svg

JOSAM AM10, Manual

Share
Download
JOSAM AM10 Manual Download Page 16

JOSAM laser AM
Measuring system

16

Measuring
level

Measuring
Scale

Indicator

Upper level

Lock

Wheel alignment gauge AM301

AM301 for measurement of camber/caster

AM301 for KPI measurements

Measuring instrument for camber, caster and
KPI.
Description

The wheel alignment gauge AM301 has a rotating
scale and an adjustable measuring spirit level.

The scale is divided into degrees and minutes, minus
values ( - ) are marked in red.

On the outer part of the scale, camber can be read
by looking at the arrow on the base of the scale.

On the inner part of the scale, caster and KPI can
be read on the adjustable indicator.
The top bubble is for adjusting the vertical position.

The wheel alignment gauge should be attached to
the wheel adapter spindle.

Attachment hole for KPI measurements.
Move the instrument towards the bottom and lock
with the upper knob.

Attachment hole for measuring of camber and
caster.
Move the instrument towards the locking pin and
lock with the bottom knob.

Summary of Contents for AM10

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands