JOSAM laser AM
Measuring system
14
DIRECTION OF
LASER BEAM
Laser projector AM20-D 1
AM22-D 1
R14 Ni-Cd
AM20-D 1
5
SP LA 91:106
KLASS 2
TYPE: AM20-D 1
MADE IN SWEDEN
SERIAL NO
MANUFACTURED
Description
The laser is powered by 6 rechargeable R 14 Ni-
Cad batteries.
Charging takes place with a power operated trans-
former AM22-D 1 connected to the contact (5) on
the rear end.
The normal charging time is 14 hours.
Operation time is approx. 50 hours.
Change of batteries
- Remove the front end, 3 screws.
- Replace the batteries.
- NOTE! Place the batteries according to the
diagram in the housing.
- Replace the front end on.
Respect the text on the warning labels.
The manufacturer will not be held responsible
if the laser projector is used for any other
purpose than that for which it is intended.
Function
(1) The on/off circuit breaker.
(2) The light indicates that the laser is on.
When the laser is turned on give it full light
intensity. After approx. 10 minutes reduce the
light intensity by one half.
(3) A circuit breaker is used for regulation of light
intensity.
For full light intensity press on the upper part of
the circuit breaker, for reduced light intensity,
press on the bottom part of the circuit breaker.
(4) The shutter.
The opening for the laser beam can be closed
by turning the knob a half turn.
Adjustment
The angle of the laser beam in relation to the
wheel with the wheel adapter is adjusted by turning
an adjustment screw (6), located on the side of the
housing, with a 2 mm Allen wrench.
Laser radiation
do not stare into beam
Diode laser
Output less than 1mW
Class ll laser product
CAUTION
LASER RADIATION
DO NOT STARE INTO BEAM
DIODE LASER CLASS 2
WARNING
