Joovy CocoonX2, Manual

Page: 2 / 24

FR ES EN
!
WARNINGS
Please read these instructions carefully before use and keep them for future reference.
• Failure to follow these instructions could result in serious injury or death.
• Never leave child unattended.
• Avoid serious injury from falling or sliding out.
• Always use safety belts and ensure that all children are positioned according to these instructions.
• Be certain that the stroller is fully opened, locked securely into position, and the wheel brakes are on before allowing
children near the stroller.
• Avoid serious injury from the wheels falling off. Ensure each wheel is properly installed and secure before any use of
the stroller.
• Check the tire pressure before each use to ensure all tires are inflated to the amount specified on the side wall of
the tire.
• Never allow a child to step on the front corner plastic to get into or out of the stroller.
• Do not use the stroller on stairways or escalators.
• Keep all children away from the stroller when folding and unfolding.
• Hanging purses, shopping bags, parcels, diaper bags or other accessory items from the handle or any other parts of
the stroller may change the balance of the stroller and cause a hazardous unstable condition.
• The maximum weight that can be carried in the storage compartment is 5 lbs. (2.27 kg). Excessive weight may result in
a hazardous unstable condition.
• The maximum weight that can be placed in the rear mesh pocket is 1 lb. (0.45 kg).
• The total weight that can be placed in the in-seat mesh pockets should be less than 2 lbs. (0.9 kg).
• Never allow your stroller to be used as a toy.
• Discard all packaging materials properly. Do not allow children to play with them.
• Check your stroller for loose rivets, snaps, worn parts, and torn material or stitching on a regular basis.
• Discontinue use of the stroller should it malfunction or become damaged.
• The maximum weight of a child the product is designed to carry is 50 lbs. (22.68 kg) in each seat.
• The maximum height of a child the product is designed to carry is 44 inches (111.76 cm).
• Use of the stroller with two children weighing more than 50 lbs. (22.68 kg) each, or children totaling more than 100 lbs.
(45.36 kg), will cause excessive wear and stress on the stroller and may cause a hazardous unstable condition.
Please do not return this product to the store
If you experience any difficulty with the assembly or use of this product, or if you have a question regarding these
instructions, please contact our Customer Service Department:
UNITED STATES - Joovy: 1-877-456-5049, Hours 8:30 am 5:00 pm Central Time.
CANADA - ISIS Inc.: 1-800-667-4111, Hours 8:30 am 5:00 pm Eastern Time.
Please Note: Styles and colors may vary.
1 Assembling and Using your Stroller
To ensure safe operation of your stroller, please follow these instructions carefully.
2 Unpacking the Product
• Carefully remove stroller and all parts from the box, plastic bag and inside the zippered seating compartment.
• Remove the cardboard packing materials from the ends of the frame.
• Identify the parts (stroller, front wheels (2), rear wheels (2), handle bar, locking pins (4), locking pin with clamp, and documents [not shown])
with the pictures in Figure 2.1 .
NOTE: The locking pins are already attached to the stroller. There are two located on the rear wheel housing tube and two located near the
handle bar housing. The handle bar is attached to the rear of the hood. The the locking pin with clamp is installed on the attachment tube on
the lower front end of the stroller.
• Remove all cardboard and plastic coverings from any areas of the product.
• Discard all packaging materials properly. Do not allow children to play with them.
!
CAUTION
Adult assembly is required for this product. No Tools Required.
3 Assembling the Stroller
• DO NOT unfold the stroller at this time.
• Position the stroller upside down in a clean dry place.
• Locate one of the rear wheels and insert the stub axle into the rear wheel housing. See Figure 3.1 .
• Locate a locking pin on the rear housing tube and insert the pin through both sides of the tube. Attach the safety clamp over the pin to secure it
into place. See Figure 3.2 .