Room Instruction Manual
• Locate the bassinet base support tubes. Slide the closed end of a tapered end tube into a sleeve at the
bottom of the bassinet support. Then slide the closed end of an open end tube into the opposite sleeve.
Slightly angle the tubes together and fully insert the tapered end into the open end. See Figure 22. Open
the Velcro® loop, place the joined tubes inside the loop and secure the Velcro® around the tubes.
• Repeat the previous step on the other side so there are two support tubes on the bottom of the bassinet
attachment.
• Be certain that the tubes on both sides of the bassinet are pushed together completely.
• Place the mattress into the bassinet support with the soft side facing up and secure the four square
Velcro® attachment points on the corners of the mattress to the bassinet support. See Figure 23.
• Tuck the long sides of the mattress underneath the mattress pad and position the mattress until it fits
snugly. See Figure 24
.
Figure 19
Figure 18
Figure 20
Clear Window
Velcro® Strip
Plastic Rail Attachments
Figure 21
Figure 22
Figure 23
Figure 24
Page 11
