Room Instruction Manual
Page 10
• Failure to follow these warnings and the instructions could result in
serious injury or death.
• FALL HAZARD: To help prevent falls, do not use this product when the
infant begins to push up on hands and knees or weighs over 15 lbs
(6.8 kg), whichever comes first.
• SUFFOCATION HAZARD: Infants can suffocate:
• In gaps between an extra pad and side of bassinet.
• On soft bedding.
• NEVER add a mattress, pillow, comforter, or padding. Use ONLY the
mattress pad provided by Joovy.
• To reduce the risk of SIDS, pediatricians recommend healthy infants be
placed on their back to sleep, unless otherwise advised by your
physician.
• If a sheet is used with the pad, use only the one provided by Joovy or
one specifically designed to fit the dimension of the bassinet mattress.
• Strings can cause strangulation! DO NOT place items with a string
around a child’s neck, such as hood strings or pacifier cord. DO NOT
suspend strings over bassinet or attach strings to toys.
• NEVER use the bassinet with more than one child at a time.
• NEVER place a child under the bassinet.
• The bassinet must be fully assembled per Joovy’s instructions before
using. Do not modify the bassinet or add any attachments not
specifically recommended by Joovy.
• DO NOT store the bassinet in the playard while in use.
• The bassinet is designed for use ONLY on this Joovy playard. DO NOT
use on any other product or surfaces.
BASSINET
Read all instructions BEFORE assembly and USE of product.
KEEP INSTRUCTIONS FOR FUTURE USE.
!
WARNING
• With the playard erected and any accessories removed, remove the mattress from the bottom of the
playard to use inside your bassinet. Set the mattress aside.
• Locate the bassinet attachment and orient it so the plastic rail attachments are at the top and the small
clear window is at the corner with the nightlight. See Figure18.
• Secure all four plastic rail attachments onto the long top rails so they are directly adjacent to the corner
plastic. See Figure 18.
• Make sure that the Velcro® strips located between the plastic rail attachments are attached to the sides of
each long top rail. See Figure 18.
• Locate a bassinet side rail tube (longest tube) and slide it through the sleeve in the fabric on the end of
the support. Then pull the tube and the support over the side rail and tuck the ends of the tube under the
openings of the corner plastic. See Figures 19 and 20.
• Carefully adjust the fabric and attach the two pieces of Velcro® in both corners. See Figure 21.
• Repeat these steps on other side.
Installing the Bassinet