Room Instruction Manual
Page 4
Figure 2
Figure 4
Figure 5
Figure 3
!
WARNING
Be careful not to pinch your fingers on the
top corners during assembly.
ALWAYS ensure that all side rails are
locked into position before using this
product.
ALWAYS secure the mattress to the playard
floor with the Velcro® straps.
NEVER use items not recommended by
Joovy with this product.
Assembling the Playard
• Orient the playard so it is resting on the feet and
wheels.
• DO NOT push the center floor down yet.
• With the center of the playard up, pull upward on each
side rail until it locks into position. You will hear the
rails lock into place. See Figure 2.
NOTE: There is ONE mechanism that locks BOTH
pieces of tubing on EACH side rail. See Figure 3.
• Make sure that the top rails have become rigid. If they
haven’t, pull up again until they are rigid. You may
need to pull the center of the floor higher.
• Once you have locked the side rails in the up position,
go back and check each side rail again to be sure
they are all locked into position.
• Hold one side of the playard up and push down the
center of the floor. See Figure 4.
• Set the mattress inside the playard with the soft side
up. NOTE: If you wish to use the mattress sheet,
please reference the section for attaching the sheet
before proceeding.
• Locate the Velcro® straps near the corners of the
mattress.
• Slide the straps through the two slots in the floor of
the playard and secure them to the underside of the
playard. See Figure 5. Repeat this step on the other
three corners.
