Room Instruction Manual
Page 5
Attaching/Removing the Mattress Sheet
NOTE: This product comes complete with a custom fit mattress sheet. To use the sheet with your
playard, please follow the instructions below.
Before attaching the mattress to the playard, simply fit the sheet over the mattress with the corners in
place. Then, feed the Velcro® straps through the slots in the sheet so they are exposed and then through
the slots on the playard floor. Slide a strap through the slot in the floor of the playard and secure it to the
underside of the playard as detailed in Figure 5. Repeat this step on the other three corners.
To remove the mattress sheet, detach the Velcro® straps and feed the straps through the slots in the
sheet. Then, simply pull the sheet off of the mattress.
!
WARNING
Prevent possible strangulation or entanglement.
Never use playard sheet unless it fits securely on the
playard mattress.
Attaching the Parent Organizer
• Orient the organizer with the plastic tray facing
upward.
• Locate the hooks located near the rear center of the
tray and rotate each hook until it is facing upward.
See Figure 6.
• Attach the hooks securely over the narrow side of the
playard closest to the electronic unit. See Figure 7.
NOTE: If desired, the organizer will attach on either
narrow side of the playard.
• If necessary, the stabilizer bars should be rotated to
the horizontal inward position to stabilize the organizer
against the side of the playard. See Figure 8.
!
WARNING
Keep objects inside Parent
Organizer out of child’s reach.
Discontinue use and remove this
accessory when child is able to
pull himself up in the playard.
Maximum weight allowed in parent
organizer is 9 lbs.
Figure 6
Figure 8
Figure 7
