Version OS 1.0
9.3 Save Recording to File
If you go right with the cursor beyond the first page, you come to this page:
Save Recording to File
Save=Ent
If you press and click
(Data)
or
(Enter)
, you save the RAM buffer of a previous
recording to the root directory of the SD card. The Alpha Base automatically creates a
file name that is above the highest file name of the file enumeration – which is done
when you press DISK or open a folder. The file names are assembled from
ABWV****.raw. The asterisks stand for the file number that is automatically given, e.g.
ABWV0124.raw. In order not to overwrite existing files, the index number is
incremented on every storing process. As mentioned before, the file format is *.RAW
48kHz 16 Bit mono. If you want to process this file on a computer, you have to define
the sampling rate and bit depth. Almost any wave editor can read this file format.
9.4 Load Presets from File
Go right with the cursor and you enter this page:
Load Presets from File
ABPROOO1.BIN____Load=Ent
If there are readable preset files, they are listed in the lower line. Scroll them with the
(Data)
Wheel or the
(Up/Down)
buttons. The Alpha Base can read up to 20 preset
files that are indexed like ABPR00**.BIN.
If there is no readable file on the selected index number, the display shows:
Load Presets from File
Not found _3__Load=Ent
Note that the Alpha Base holds the index number for the next page - Save Presets to
File. So if you want to create a new preset file, scroll here for an available index
number, shown as Not Found_X__
But If you want to load a specific preset file, select it and then go right with the cursor.
Load Presets from File
ABPROOO2.BIN____Load=Ent
ALPHA BASE Operating Manual
77
