Version OS 1.0
4 KIT/SEQ
The
(KIT/SEQ)
mode is used for the selection and naming of drum kits or parameter
display or pitch sequencer display (if SEQ is on).
4.1 Select a drum kit:
The
(KIT/SEQ)
button switches between Kit select mode and parameter mode.
4.1.1 Kit Select Mode
Kit No
BPM
Al p h a O n e O O O
1 2 O . O
Volume:
KD MB CH OH CP RM CR RD X1 X2 FM
The height of the bars show the volume of the instruments in ascending order from left
to right.
In Kit select mode, use the
(DATA)
wheel or the
(UP/DOWN)
buttons to select a kit
and load it by clicking
(DATA)
or pressing
(ENTER)
.
You can select 127 different drum kits.
One Drum Kit contains a set of all sound parameters of all instruments.
One Multi Kit contains a vector set of 11 different instrument numbers that are stored in
the single Drum Kit that the 11 individual numbers address.
4.1.2 Parameter Mode
K Tu n e
Pi t c h D e c a y H a r m
D O 8 6
O2 8
O 8 4
O O O
The height of the bars show the amount of the right-handed parameter.
If you are in Kit select mode and turn one of the 16 endless encoders, the menu
automatically switches to parameter mode. If you now want to select a kit, you have
to press (
KIT/SEQ)
again to re-enter Kit select mode.
26
ALPHA BASE Operating Manual
