17
ENGLISH
Operations
Channel selection
To select the channel, simply enter its number using the channel numeric keypad, or use the
CH + and CH-
keys (
UP/DOWN arrows
) which allow you to move forward or backward by one unit.
It’s possible to visualize also the list of the channels using the
OK/LIST
key on the remote control. Sliding
the list via
arrows
keys and confirming with
OK
, it’s possible to
visualize the desired channel.
Or by pressing the
EG (GUIDE)
key on the remote control you access the
Program Guide
(if supported by
the television broadcaster), using the
arrows
keys you can change the channel, keeping the guide open;
once you have reached the desired channel, close the window with the
EXIT
or
EG (GUIDE)
button.
It’s possible
also to change channels using the buttons located on the front panel of the decoder.
Volume adjustment
Using the
VOL +
or
VOL-
keys (
RIGHT/LEFT arrows
) it is possible to adjust the volume of the audio. To
completely reset the volume, use the
MUTE
button on the remote control, once you retype the volume it
will reset to the previous value.
Channel information
Pressing
INFO
key on the remote control the information about the channel will be visualized.
Summary of Contents for JL43700
Page 45: ...16 ENGLISH...
