Table 5: Entering Permanent Temperature
Setpoints (Cont.)
Press YES to change the unoccupied
heating setpoint. Press NO to
advance to temperature display units.
Use the UP/DOWN arrow keys to set
temperature. Press YES to store
value and advance to next menu.
Press YES to set the display units to
°
F or
°
C. Press NO to advance to
temperature setpoint type menu.
Press YES to return to the Status
Display Menu or NO to re-enter the
temperature setting menu.
Entering Temporary Temperature Setpoints
To temporarily change the setpoint, press the
UP/DOWN arrow keys to change the temporary
setpoint for the current mode of operation.
Note:
Whether the thermostat is heating or cooling,
the respective setpoint will be temporarily adjusted.
Note:
To toggle between the temporary heating and
cooling setpoints, press the NO key while changing the
temporary setpoints.
Ending Temporary Temperature Setpoints
The temporary setpoints remain in effect for the
duration set in the Temporary Occupancy Time
parameter (TOccTime) or until manually released.
To release the temporary setpoint sooner, while in the
main User Menu:
1. Answer YES to the first prompt to appear.
2. If the thermostat does not immediately return to
the Status Display Menu, press MENU again and
YES to exit the Main User Menu.
The setpoint reverts to the Permanent Temperature
Setpoint.
Selecting the System Mode
The T600HPP-2 has five system modes:
•
Automatic Mode (auto)
Automatic changeover between heating and
cooling. This is the default setting.
Unocc HT
set? Y/N
•
Cooling Mode (cool)
Cooling operation only.
•
Heating Mode (heat)
Heating operation only.
Unocc HT
62.0
°
F
•
Off Mode (off)
The T600HPP-2 is off. However, when frost
protection is on (see the
Enabling Frost Protection
[Frost pr]
section) the thermostat still calls for heat,
if required.
°
F/
°
C
set? Y/N
•
Emergency Heat Mode (emergenc)
Forced auxiliary heat operation mode only
To set the system mode while in the Main User Menu:
1. Answer NO to all prompts until the system mode
prompt appears in the display. Press YES to set
the system mode.
Exit?
Y/N
2. Use the UP/DOWN arrow keys to locate the
desired system mode. Press YES to select the
desired system mode.
3. Press YES to return to the Status Display Menu or
NO to return to the system mode selection menu.
Selecting the Fan Mode
The T600HPP-2 has three fan mode settings:
•
On Fan Mode (on)
Energizes the fan all the time for both occupied
and unoccupied periods (even if the system mode
is set to
off
).
•
Automatic Fan Mode (auto)
Operates the fan only on a call for heating or
cooling for both occupied and unoccupied periods.
This is the default setting.
•
Smart Fan Mode (smart)
Energizes the fan all the time for occupied periods
and only on a call for heating and cooling in
unoccupied periods.
To select the fan mode while in the Main User Menu:
1. Answer NO to all prompts until the fan mode
prompt appears in the display. Press YES to set
the fan mode
2. Use the UP/DOWN arrow keys to locate the
desired fan mode. Press YES to select the desired
fan mode.
3. Press YES to return to the Status Display Menu or
NO to return to the fan mode selection menu.
T600HPP-2 Programmable Thermostat Installation Instructions
15