Network Room Module Technical Bulletin
24
Figure 16: FX Tool to Open Module
3.
While pressing down gently, pry the cover away from the base. As the
two parts separate, remove the tool and continue to pull the cover
away from the base until the cover is free.
4.
To reassemble the room command module, place the cover over the
lower edge of the base, and push the upper part of the cover until it
clicks firmly into place.
5.
Replace the anti-tamper screw in the top of the module enclosure
(North American models only).
Mounting the NRM Directly on a Wall Surface
To mount the NRM directly on a wall surface (see Figure 17 and
Figure 18 for dimensions):
1.
Hold the module base on the wall to cover the electrical outlet and
mark the position of at least two holes. Drill holes and insert plastic
plugs (wall anchors) into holes.
2.
Mount the module base on the wall and secure with at least two
screws.