John Lewis JLDWW 906, Instruction Manual

Page: 21 / 36

Multi tab function
This appliance is equipped with the Multi tab
function, that allows the use of combi
detergent tablets.
These products are detergents with a
combined cleaning, rinsing and salt functions.
They can also contain other different agents
depending on which kind of tablets you
choose ('3 in 1', '4 in 1', '5 in 1' etc.).
Check whether these detergents are suitable
for your water hardness. See the
manufacturers instructions.
Once this function is selected it will remain
active for all following wash programmes.
With the selection of this function the inflow
of rinse aid and salt from each respective
supply container is automatically deactivated
and also the indicator lights for salt and rinse
aid are deactivated.
When using the Multi tab function, the cycle
duration may change. If this is the case, the
running time for the programme is
automatically updated on the digital display.
Activate/deactivate the Multi tab
function before the start of a washing
programme.
Once the programme is running, the
Multi tab function can
NO longer be
changed. If you want to cancel the
Multi tab function you have to cancel
the programme setting and then
deactivate the Multi tab function.
In this case you have to set a washing
programme (and desired options)
again.
Activation/deactivation
of the Multi tab function
Press the Multi tab button, the Multi tab
indicator light illuminates. This means that
the function is active.
To deactivate the function press the Multi
tab button, the Multi tab indicator light turns
off.
If the drying results are not
satisfactory we suggest that
you:
1. Fill up the rinse aid dispenser with
rinse aid.
2. Activate the rinse aid dispenser.
3. Set the rinse aid dosage to
position 2.
• The activation/deactivation of the
rinse aid dispenser is only possible
with the Multi tab function active.
Activation/deactivation
of the rinse aid dispenser
1. Press the On/Off button. The
dishwasher must be in setting mode.
2. Simultaneously press and hold function
buttons B and C , until the lights Glass ,
Rinse hold and Multi tab start
flashing.
3. Press function button B , the lights Glass
and Multi tab turn off while the light
Rinse hold continues to flash. The
digital display indicates the current
setting.
rinse aid dispenser deactivated
21