Cruisecontrol GC55 Installation manual
22
5
Diagnostics and trouble shoot
5.1
Diagnostics 1: CM and clutch switch connection
Step
Action
Confirmation
1
Switch the ignition completely OFF
2
Operate and hold
3
Switch the ignition ON and wait for beep
1 long beep
(Does not operate: refer to § 5.3 trouble shoot 1).
4
Release
5
Switch the cruisecontrol ON
CM-LED turns green
6
Operate
1 beep, CM-LED
turns orange
Servo clicks once
(Does not operate: refer to § 5.3 trouble shoot 1).
7
Press the brake pedal briefly.
1 beep, CM-LED
turns green
Servo clicks once
(Does not operate: refer to § 5.7 trouble shoot 5)
8
Operate
1 beep, CM-LED
turns orange
Servo clicks once
(Does not operate: refer to § 5.3 trouble shoot 1).
9
press the clutch pedal (only if a clutch protection is
installed)(does not operate: Refer to § 3.3 Wiring
harness connections)
òr operate
II
(does not operate: refer to § 5.3 trouble shoot 1)
òr press the brake pedal briefly
(does not operate: refer to § 5.7 trouble shoot 5)
1 beep, CM-LED
turns green
Servo clicks once
10
if all operates well, refer to:
§ 5.2 Diagnostics 2: servo, vehicle speed signal.
11
Switch the ignition completely OFF to exit Diagnostics.
