background image

2

Joerns® Support Surface
FlapCair Model

© 2013 Joerns Healthcare • 6110066 RevD • 13-2631

Important Precautions

Important Notice: 

The equipment must be installed 

and operated in the manner for which it was intended. 

Facility staff/user is responsible for reading and 

understanding the product user manual and contacting 

Joerns Healthcare if anything in this manual is unclear. 

Joerns will not be held responsible for any injuries 

resulting from failure to comply with the instructions 

and precautions in this manual.

Warning:

 Joerns Healthcare’s specialty support 

surfaces are designed as mattress replacement 

systems. The risk of entrapment may occur when 

the equipment is placed on bed frames that leave 

gaps of even a few inches between the mattress and 

the headboard, footboard, and bed or side rails. The 

equipment is NOT to be used when such gaps are 

present. 

Facility staff/user is responsible for ensuring that all 

mattresses properly fit the bed frames. Joerns is not 

responsible for the placement of its equipment on bed 

frames that leave gaps between the mattress and 

the headboard, footboard or bed or side rails which 

present a risk of harm to patients.

Warning:

 An optimal bed system assessment should 

be conducted on each patient by a qualified clinician 

or medical provider to ensure maximum safety of 

the patient. The assessment should be conducted 

within the context of and in compliance with the state 

and federal guidelines related to the use of restraints 

and bed system entrapment guidance, including 

the 

Clinical Guidance for the Assessment and 

Implementation of Side Rails

 published by the Hospital 

Bed Safety Workgroup of the U.S. Food and Drug 

Administration. Further information can be obtained at 

the following web address: http://www.fda.gov/cdrh/

beds/.

When using the mattress system, always ensure that 

the patient is positioned properly within the confines 

of the bed. Do not let any extremities protrude over 

the side or between the bed rails when the mattress is 

being used.

Danger: Explosion Hazard:

 Do not use in the 

presence of flammable anesthetics. Do not use in 

the presence of smoking materials or open flame. 

Air flowing through the air mattress will support 

combustion.

Joerns Healthcare 1_Art Direction_Joerns Beds_700 Series_UltraCare 8page

5/2007_Page 2 of 8

2

Danger: 

To reduce the risk of shock, adhere to the 

following instructions. Failure to do so could result in 

personal injury or equipment damage.

• 

Immediately after using the FlapCair, unplug it 

from its power source.

• 

Do not place or store the product where it can fall 

or be pulled into a tub or sink.

• 

Do not place or drop the product into water or 

other liquid.

• 

Do not remove the back of the control unit. Refer 

servicing to Joerns Healthcare.

Warning: 

To reduce the risk of burns, shock, fire, or 

personal injury, adhere to the following instructions. 

Failure to do so could result in personal injury or 

equipment damage.

1.  Use this product only for its intended purpose as 

described in this manual. Only use attachments 

and/or accessories that are recommended by 

the manufacturer.

2.  If this product has a damaged power cord or 

plug, is not working properly, has been dropped 

or damaged, or has been dropped into water, do 

not operate it. For examination and repair, return 

the product to Joerns.

3.  Keep the control unit and power cord away from 

heated surfaces, e.g. space heaters.

4.  Never block the air openings of the product. Do 

not place the control unit on a surface, such as a 

bed or couch, where the air opening and/or filter 

compartment, located on the back of the control 

unit, may be blocked. Keep the air openings free 

of lint and hair.

5.  Never drop or insert any object into any opening 

or hose. 

6.  Do not spill food or liquids onto the control 

unit. If a spillage does occur, turn off the unit, 

disconnect it from its power supply and allow at 

least 24 hours for drying.

7.  Do not use the product outdoors, or where 

aerosol-spray products are used.

8.  Plug this product only into a properly grounded 

outlet. Refer to “Grounding Instructions”.

9.  Ensure nothing is placed on the power cord and 

ensure it is not located where it can be stepped 

on or tripped over. 

10. Do not attempt to service the control unit. Please 

call Joerns Healthcare for any service requests.

11.  The therapy pad (top cover) of this product is  

not air permeable and may present a  

suffocation risk. It is the responsibility of the 

caregiver to ensure that the patient can use   

this product safely.

Joerns Healthcare 1_Art Direction_Joerns Beds_700 Series_UltraCare 8page

4/2007_Page 4 of 8

Summary of Contents for FlapCair















Reviews: