background image

5

Joerns® Support Surface

FlapCair Model

© 2013 Joerns Healthcare • 6110066 RevD • 13-2631

Joerns Healthcare 1_Art Direction_Joerns Beds_700 Series_UltraCare 8page

4/2007_Page 5 of 8

Joerns Healthcare 1_Art Direction_Joerns Beds_700 Series_UltraCare 8page

5/2007_Page 6 of 8

5

Introduction

The FlapCair, provided by Joerns Healthcare, is a 

unique therapy system that provides pressure relief 

by combining low air loss with pulsation. Low air loss 

therapy has been demonstrated to reduce the risk of 

pressure ulcers as well as being a valuable aid in the 

treatment of pressure ulcers. The pulsation feature 

may provide additional patient comfort and enhance 

the function of the lymphatic system. 

The FlapCair mattress replacement system is suitable 

for the care and prevention of all stages of pressure 

ulcers, for patients who have been assessed to be 

at risk from the complications of immobility, and for 

patients with healing grafts and flap sites. Our unique 

cellular system allows caregivers to provide super 

flotation zones to provide extra relief to these sites.

Joerns FlapCair is the first true low air loss mattress to 

take pressure relief to the next level with 160 individual 

therapy cells instead of the industry standard of 20. 

More air cells mean a more flexible surface area to 

evenly distribute the patient’s weight. The patient’s 

weight is evenly distributed over a substantial surface 

area resulting in low average interface pressures. 

The caregiver has the flexibility to provide additional 

pressure reduction on any part of the patient’s body by 

simply closing off the air supply to any of the 160 cells- 

thereby “floating” the wound or surgical site. FlapCair 

is truly customizable to meet the needs of your patient.

Warning: 

The risk of entrapment can arise when 

equipment is placed on bed frames that leave gaps 

of even a few inches between the mattress and the 

headboard, footboard, and bed or side rails. The 

equipment is NOT to be used when such gaps are 

present. See “Important Precautions” section of this 

manual.

The FlapCair is quiet, comfortable and simple enough 

for single caregiver installation, featuring rapid inflation 

in just five minutes or less. The   user-friendly controls 

allow for easy adjustment of patient comfort. 

Additionally, low friction and low shear materials, 

together with average interface pressures well below 

capillary closure levels, means that the FlapCair meets 

the comfort and clinical requirements of your patients 

up to 350 lbs.

We have ensured that the FlapCair addresses the 

four key areas in the treatment of compromised skin: 

pressure relief, moisture control, and reduction in both 

friction and shearing forces.

Moisture Control

Patients are at risk for skin maceration if excess 

moisture is permitted to accumulate beneath the 

patient. This may be due to perspiration, incontinence 

or wound drainage. 

On the FlapCair, moisture is controlled via the specially 

treated breathable, fluid-proof, urethane coated nylon 

therapy pad. The moisture vapor permeable fabric 

of the therapy pad allows a sufficient amount of air 

to circulate beneath the pad and wick away excess 

moisture.

Shear and Friction Reduction

Shearing occurs when the skin is stationary in relation 

to the support surface, while the underlying tissues 

and vessels are stretched and damaged. When a 

patient’s skin rubs against another surface, the result 

is friction. The top surface of the FlapCair therapy pad 

is constructed from a very smooth nylon fabric with low 

friction and low shear properties to protect the patient’s 

skin from these damaging forces.

Indications for Use

Note: 

The selection of a pressure-relieving surface 

needs to be based on each individual patient’s clinical 

condition, diagnosis and/or co-morbidities. The choice 

and use of a support surface is one factor in a holistic 

program of wound care  

and treatment.

Spinal Cord Injury

The FlapCair is not recommended for use by patients 

with unstable spinal fractures. Advice should be 

obtained from the appropriate physician before using 

the FlapCair system for these patients. 

Pressure Relief

Pressure Ulcers  

Flaps

Grafts 

  Rehabilitation

Neurology  

 

Dermatology 

Burns 

 

  Amputations

Pain Management

AIDS 

 

  Arthritis

Oncology

Summary of Contents for FlapCair















Reviews: