13
INSTALLING THE GUARD
WARNING:
The guard must be
installed before installing a grinding
disc or using the angle grinder. Failure
to do so could result in serious
personal injury.
1. Depress the spindle lock button (1)
and rotate the clamp nut (2) until the
spindle locks (Fig. 2).
2. Turn the clamp nut counter clockwise
and remove it from the spindle.
NOTE:
If the clamp nut cannot be
loosened by hand, use the wrench (3)
provided.
3. Remove the disc flange (4). It will
simply pull off the spindle (5).
4. Loosen the guard clamp bolt to allow
the guard clamp to expand for
installation.
5. Slide the guard clamp (7) over the
spindle housing (8) until the blade
guard locating detents mate with the
groove (9) in the spindle housing
(Fig. 3).
NOTE:
Rotate the guard so it is positioned
correctly depending upon the location of
the side handle in Fig. 6 &7.
ASSEMBLY AND OPERATION
!
7
9
8
