12
WARNING:
Always disconnect
your angle grinder from the power
source when replacing grinding discs,
adjusting the guard, cleaning or when
the tool is not in use. Disconnecting the
angle grinder will prevent accidental
starting that could cause serious
personal injury.
INSTALLING THE SIDE HANDLE
1. Unplug the angle grinder from the
power source.
2. Install the side handle (1) by screwing
it clockwise into the left side (2) of the
gear housing (3) (Fig. 1).
NOTE:
The handle can be installed on
either the left or right side of the grinder
gear housing, depending upon operator
preference (Fig. 6 & 7). The side handle
must always be used to prevent loss of
control and possible injury.
3. Tighten the side handle securely.
NOTE:
Hand-tighten the side handle. Do
not over tighten.
ASSEMBLY AND OPERATION
!
1
2
3
