![background image](http://html.mh-extra.com/html/jnj-spas/spa-8098/spa-8098_operating-instructions-manual_2020596005.webp)
5
1
)
circulation
2
)
Set start of circulation
3
)
Set lasting time for circulation
4
)
Finished
3)
、
Press
“
”
to set the circulation times; it will show the minimum(5 minutes) on the LCD and this time will
not flash. It will add 5 minutes by pressing
“
”
each time.
It will add 1 hour by pressing
“
”
each
time
。
The maximum working time is 19hours and 55 minutes.
When you have completed this procedure continue
to the next setting.
4)
、
If all settings have been correctly, set Press
“
”
for confirmation
, the system will quit this mode
automatically(press key “
” to clear settings and exit).
***Notice***
1 All the setting of Circulation-cleaning must be set on Power OFF status
2 Circulation PUMP and OZONE are not working while setting the circulation
cleaning.
5
、
Set preheating (if required)
:
Only one pre-heating setting is allowed each day if required.The LCD can show clearly in the following
figures whether pre-heating settings are set or not
See following Fig.7-8
:
Summary of Contents for SPA-8098
Page 1: ...1 HOT TUB Model SPA 8098 OPERATING INSTRUCTION ...
Page 13: ...13 ...
Page 14: ...14 ...
Page 15: ...15 ...